The Edon Mitre Saw 1800W is a powerful electric cutting machine designed for carpentry, furniture making, timber framing, interior finishing and professional woodworking. It is suitable for cutting wood, MDF boards, skirting boards, door frames and other compatible materials with accuracy.

The machine uses a 1800W electric motor and a 255mm (10-inch) circular saw blade to make straight, angled and bevel cuts. Its adjustable cutting table allows carpenters to prepare timber joints, decorative corners and frame components.

One commonly sold version is the Edon MS-92552A, a non-sliding compound mitre saw with a no-load speed of 6,000 RPM

The Edon 1800W mitre saw is suitable for carpenters, furniture workshops, interior designers, construction contractors and DIY users looking for a practical timber cutting machine in Kenya.

Edon Mitre Saw 1800W Price in Kenya 2026

Online listed prices checked for October 2026. These are third-party reference prices, not a confirmed selling price at Peter Machines and Spares.The final cost depends on the exact model, blade quality, included accessories, warranty and delivery charges.

Edon Mitre Saw 1800W Technical Specifications

The following specifications apply mainly to the Edon MS-92552A model.

Technical information is based on listings for Edon MS-92552A. Some suppliers give different weights and cutting capacities. The 135 × 75mm cutting capacity is from a specific model listing and should be verified on the supplied unit.

Main Features of Edon Mitre Saw 1800W

1. Powerful 1800W Electric Motor

The Edon mitre saw uses an 1800W motor designed for crosscutting timber and other compatible materials.

This makes it useful for carpenters who regularly prepare wooden frames, furniture parts and finishing materials.

The motor provides high-speed blade rotation for efficient cutting when the correct blade is installed.

The actual cutting performance depends on the blade type, material hardness and workpiece dimensions.

2. High-Speed 6,000 RPM Cutting

The Edon MS-92552A is advertised with a no-load speed of 6,000 revolutions per minute.

This high blade speed supports smooth cutting of suitable wood when combined with a sharp, correctly rated blade.

For clean furniture and trim cuts, use a fine-tooth blade intended for the material.

Never install a blade with a maximum permitted speed below the saw’s operating speed.

3. Large 255mm Cutting Blade

The machine uses a 255mm circular saw blade, commonly described as a 10-inch blade.

This blade size is widely used in mitre saws for woodworking and interior finishing.

It is suitable for cutting timber sections, skirting boards, mouldings and furniture components within the machine’s rated capacity.

Before replacing the blade, confirm the blade diameter, bore size, tooth design and rotational speed rating.

4. Adjustable Mitre Cutting Angles

The Edon 1800W mitre saw features a rotating cutting table.

This allows users to make angled cuts for frames, corners and decorative joints.

The MS-92552A is advertised with preset mitre stops at common angles such as 0°, 15°, 22.5°, 30° and 45

These settings help carpenters repeat common cuts with less adjustment.

For precision work, verify the angle with a square or angle gauge.

5. Single-Bevel Cutting

The MS-92552A supports bevel cutting up to 45°.

Bevel cutting is done by tilting the saw head so the blade cuts through the workpiece at an angle.

This is useful for decorative trim, furniture joints and selected finishing projects.

6. Compound Cutting Capability

A compound mitre saw can combine a mitre angle with a bevel angle.

This allows carpenters to make more complex cuts used in mouldings, picture frames and decorative woodwork.

The Edon MS-92552A is marketed as a compound mitre saw, making it suitable for this type of work within its mechanical adjustment limits.

7. Aluminium Base and Support Fence

The machine is advertised with a strong aluminium base.

The base supports the workpiece during cutting, while the fence helps maintain alignment.

A properly adjusted fence is important for producing straight and accurate cuts.

Long workpieces should also have suitable external support.

8. Protective Blade Guard

The Edon 1800W mitre saw includes a blade guard that covers part of the blade during normal operation.

The guard helps reduce accidental contact with the blade.

Never remove, lock open or bypass the guard.

9. Dust Collection System

The machine includes a dust outlet and is advertised with a collection bag.

This helps collect some sawdust produced during cutting.

For frequent workshop use, a compatible dust extractor is preferable, particularly when cutting MDF or engineered wood.

10. Portable Workshop Design

The Edon MS-92552A has a compact, non-sliding design.

This makes it suitable for workshops where space is limited.

It can also be transported between suitable job sites, provided the saw head is secured according to the manufacturer’s instructions.

What Can Edon 1800W Mitre Saw Cut?

The Edon MS-92552A is mainly designed for woodworking. Other materials may be cut only when the saw manufacturer approves the application and a suitable blade is fitted.

The MS-92552A is advertised for wood, aluminium and PVC applications, but users should confirm material compatibility and blade requirements before cutting anything other than wood

Applications of Edon Mitre Saw 1800W in Kenya

Furniture Making

Furniture workshops can use the Edon mitre saw to prepare wooden components for tables, chairs, shelves, beds and cabinets.

The adjustable cutting angles are useful when making frames and decorative furniture joints.

Door and Window Frame Installation

Carpenters can use the machine to cut wooden door frames, architraves and window finishing strips.

Accurate angled cuts help produce neat corners during installation.

Skirting Board Installation

The Edon 1800W mitre saw is useful for cutting skirting boards at 45-degree angles.

This helps installers create neat corner joints in homes, offices and commercial buildings.

Picture Frame Making

Picture frames require accurate and repeatable angled cuts.

The mitre adjustment makes it easier to prepare matching frame pieces.

Timber Framing

The machine can cut suitable timber sections used in light construction, shelving and interior partition work.

However, it is not designed to rip long boards along their length.

Interior Decoration

Interior finishing contractors can use the saw for ceiling trims, mouldings, decorative strips and other compatible wooden finishing materials.

Edon 1800W Mitre Saw Cutting Capacity

One published specification for the MS-92552A gives the following approximate capacities:

These values should be treated as model-specific reference figures. Maximum cutting width and depth can change with the mitre and bevel settings.

For wider timber boards, a sliding mitre saw may be more suitable.

Edon 1800W Mitre Saw vs Edon Sliding Mitre Saw

For example, the Edon ED-HZ91553 sliding mitre saw is advertised with an 1800W motor, 255mm blade and sliding capacity for boards up to approximately 305mm wide.

Choose the MS-92552A for regular crosscuts, framing and interior finishing. Consider a sliding version if you frequently cut wide boards.

How to Choose the Best Edon Mitre Saw in Kenya

Before buying an Edon mitre saw, check the following factors.

Blade size: A 255mm blade is useful for common carpentry work, but the machine’s actual cutting capacity matters more than blade diameter alone.

Motor rating: The 1800W motor is suitable for general woodworking, provided the blade and workpiece are appropriate.

Cutting angles: Look for secure mitre and bevel adjustments that hold their settings accurately.

Blade quality: A good blade can make a major difference to the finish of a cut.

Safety features: Confirm that the blade guard, switch and workpiece clamp are working correctly.

Spare parts: Ask about compatible blades, carbon brushes if applicable, switches and other replacement parts.

Warranty: Confirm the supplier’s warranty terms and after-sales support.

How to Use Edon 1800W Mitre Saw Safely

1. Place the saw on a stable, level workbench.

2. Inspect the blade, guard, power cable and cutting table.

3. Select the correct blade for the material.

4. Mark the cutting line on the workpiece.

5. Adjust the mitre or bevel angle as required.

6. Lock the adjustment controls securely.

7. Position the workpiece firmly against the fence.

8. Use a suitable clamp to hold the material.

9. Keep your hands outside the manufacturer’s marked danger area.

10. Start the saw and allow the blade to reach operating speed.

11. Lower the blade smoothly through the workpiece without forcing it.

12. Release the trigger and wait for the blade to stop before raising the head, following the saw’s manual.

13. Disconnect the machine before cleaning or changing the blade.

Wear eye protection, hearing protection and suitable respiratory protection. Avoid loose clothing and keep the work area clear.

Edon Mitre Saw 1800W Maintenance Tips

Proper maintenance helps maintain cutting accuracy and reduce machine breakdowns.

• Clean sawdust from the table, fence and ventilation openings.

• Inspect the blade for damaged or missing teeth.

• Replace dull blades promptly.

• Check that the blade guard moves freely.

• Keep the mitre and bevel locks secure.

• Inspect the electrical cable before use.

• Empty the dust collection bag regularly.

• Check the fence and blade alignment.

• Store the machine in a dry location.

• Have electrical and mechanical faults repaired by a qualified technician.

Always disconnect the machine from electricity before maintenance.

Common Edon Mitre Saw Problems and Solutions

Where to Buy Edon Mitre Saw 1800W in Kenya

Customers looking for the Edon 1800W mitre saw in Nairobi can enquire with Peter Machines and Spares.

Contact the business to confirm the Edon MS-92552A’s current price, availability, accessories, warranty and delivery arrangements.

Frequently Asked Questions

What is Edon mitre saw 1800W?

The Edon 1800W mitre saw is a corded electric cutting machine designed for straight, angled and bevel cuts in wood and other approved materials.

How much is Edon mitre saw 1800W in Kenya?

The Edon 1800W mitre saw is advertised by selected Kenyan retailers at approximately KSh 17,999 to KSh 20,999.

What is the blade size of Edon 1800W mitre saw?

The Edon MS-92552A uses a 255mm (10-inch) circular saw blade.

What is the speed of Edon 1800W mitre saw?

The MS-92552A has an advertised no-load speed of 6,000 RPM.

Can Edon 1800W mitre saw cut aluminium?

The MS-92552A is advertised for suitable aluminium profiles, but the blade, material and operating procedure must be approved by the manufacturer. Do not use an ordinary wood blade for metal unless it is specifically rated for that application.

Can Edon mitre saw cut MDF?

Yes. It can cut suitable MDF boards using the correct blade and dust extraction system.

Can Edon mitre saw cut hardwood?

Yes, provided the timber fits within the rated cutting capacity and the correct blade is used.

Can Edon 1800W mitre saw make 45-degree cuts?

Yes. The MS-92552A supports mitre adjustments and single-bevel cutting up to approximately 45 degrees.

Is Edon 1800W mitre saw a sliding saw?

The MS-92552A is a non-sliding compound mitre saw. Edon also sells separate sliding mitre saw models.

Does Edon 1800W mitre saw have a dust bag?

Yes. The MS-92552A is advertised with a dust collection outlet and bag.

Is Edon 1800W mitre saw good for furniture making?

Yes. It is useful for preparing furniture frames, shelves, decorative wooden parts and other suitable components.

Where can I buy Edon mitre saw 1800W in Nairobi?

Contact Peter Machines and Spares on 0719276999 for the current price, model availability and ordering information.

I can also create an Edon 1800W mitre saw flyer for your website, Facebook and WhatsApp.