Dawan House, 2nd Floor, Nairobi

+254 719 276 999

1.2HP Solar Surface Pump 900W in Kenya

1.2HP Solar Surface Pump 900W in Kenya

Original price was: KSh 68,000.Current price is: KSh 48,000.

Description

The solar-submersible-pump-1500w-in-kenya/”>1.2 solar surface pump  900w in kenya is a high flow water pump designed for irrigation, water transfer, and surface water applications such as rivers, dams, tanks, and shallow wells. Unlike submersible pumps, this pump is installed above ground and draws water using suction before pushing it through pipes with strong flow. It is ideal for farmers and users who need large volumes of water rather than high lifting height. The 1.2hp solar surface pump 900w in kenya is built for efficiency, reliability, and easy installation in Kenyan conditions.

Solar Surface Pump System Overview

The 1.2hp solar surface pump 900w in kenya operates using solar panels and does not require grid electricity. It is powered by DC voltage through a controller that regulates energy and protects the system. Surface solar pumps in this category are widely used in Kenya for irrigation because they provide high water output with low running cost. Most models are self priming, meaning they can draw water without manual filling after installation.

Key Features of 1.2HP Solar Surface Pump 900W in Kenya

1.2HP High Flow Motor (900W)

The 1.2hp solar surface pump 900w in kenya is powered by a 900 watt motor, equivalent to about 1.2HP. This motor is designed for high water discharge and efficient solar operation.

Maximum Head of 15 Meters

This pump can lift water up to 15 meters, making it suitable for surface water sources and short vertical distances. It is designed for high flow rather than deep lifting.

High Flow Rate of Up to 38 m³ per Hour

The 1.2hp solar surface pump 900w in kenya delivers very high flow, with some models reaching up to 38 cubic meters per hour depending on setup and pipe conditions.

3 Inch Inlet and Outlet

The pump comes with a 3 inch inlet and outlet, allowing large volumes of water to pass through quickly. This makes it ideal for irrigation and water transfer systems.

Self Priming Function

Most models are self priming, meaning they can start pumping without manual water filling after initial setup. This improves ease of use.

Suction Depth Capability

Typical suction depth for this type of pump is around 6 to 8 meters, allowing it to draw water from shallow wells, rivers, or tanks.

Brushless DC Motor Technology

The 1.2hp solar surface pump 900w in kenya uses a brushless DC motor, which improves efficiency by up to 15 to 20 percent and reduces wear.

MPPT Controller System

The pump includes an MPPT controller that maximizes solar energy usage and ensures stable operation even during low sunlight.

Durable Construction

Most pumps are made from stainless steel or aluminum alloy with brass impellers, ensuring durability and resistance to corrosion.

Wide Voltage Range

Typical operating voltage ranges between 96V and 150V DC, allowing compatibility with standard solar systems.

High Speed Operation

The pump operates at speeds up to 3000 RPM, enabling strong water flow and efficient performance.

Technical Specifications

Feature Specification
Power 900W (1.2HP)
Maximum Head 15 meters
Flow Rate Up to 38 m³ per hour
Inlet Size 3 inches
Outlet Size 3 inches
Voltage 96V – 150V DC
Controller MPPT controller included
Pump Type Solar surface pump
Motor Type Brushless DC motor
Material Stainless steel / aluminum
Suction Depth 6 – 8 meters
Installation Surface mounted

Recommended Solar Panel Setup

For the 1.2hp solar surface pump 900w in kenya, the typical solar configuration includes:

  • 3 to 4 solar panels of 400W to 550W each
  • Total solar capacity of about 1200W to 2000W
  • Mounting structure and DC wiring
  • MPPT controller for system control

This setup ensures stable operation during peak sunlight hours.

Applications of 1.2HP Solar Surface Pump in Kenya

The 1.2hp solar surface pump 900w in kenya is suitable for irrigation farming, water transfer from rivers and dams, livestock watering, greenhouse farming, fish ponds, and tank filling. It is widely used in agriculture where large volumes of water are needed quickly.

Benefits of 1.2HP Solar Surface Pump in Kenya

High Water Output

Delivers very high flow, making it ideal for irrigation.

Low Energy Cost

Runs fully on solar power with no electricity bills.

Easy Installation

Installed above ground with simple setup.

Reliable Operation

Provides consistent water supply during sunny hours.

Durable Design

Built with strong materials for long service life.

Low Maintenance

Brushless motor reduces wear and servicing needs.

Installation Guidelines

To install the 1.2hp solar surface pump 900w in kenya, place the pump near the water source on a stable surface. Connect the suction pipe with a foot valve and the outlet pipe to the distribution system. Install solar panels in a location with direct sunlight and connect them to the controller and pump. Ensure proper wiring and test the system before use.

Maintenance Tips

Clean solar panels regularly, check suction pipes for leaks, ensure proper electrical connections, avoid dry running, and inspect the pump periodically.

Why Choose 1.2HP Solar Surface Pump 900W in Kenya

The 1.2hp solar surface pump 900w in kenya is a reliable solution for users who need high water volume for irrigation and water transfer. It is designed for Kenyan conditions and provides efficient performance with low running cost. Its high flow rate, durable construction, and solar operation make it a smart investment for farmers and rural users.

Safety Guidelines

Ensure proper wiring, avoid handling electrical parts with wet hands, secure solar panels properly, and switch off the system before servicing.

Frequently Asked Questions (FAQ)

What is the price of 1.2hp solar surface pump 900w in kenya

Prices in Kenya typically range from KSh 45,000 to KSh 120,000 depending on the system package.

What is the maximum head

It can lift water up to 15 meters.

What is the flow rate

It can deliver up to 38,000 litres per hour depending on conditions.

Is it suitable for irrigation

Yes, it is ideal for irrigation and farming use.

Can it pump from a river

Yes, it is suitable for rivers, dams, and shallow wells.

Does it require electricity

No, it runs fully on solar power.

Reviews

There are no reviews yet.

Be the first to review “1.2HP Solar Surface Pump 900W in Kenya”

Your email address will not be published. Required fields are marked *

Call Us Now WhatsApp Us Now